fisioline RADIANT

Fisioline RADIANT® Monopolar – Bipolar – Tripolar systems for T.E.C.A.R. Therapy

Fisioline RADIANT® is a radiofrequency generator which administers energy via the passing of an electrical current with monopolar, bipolar and tripolar, capacitive or resistive effects. The basic principle of radiofrequency is heat induction by means of the administration of electromagnetic waves to stimulate natural rehabilitation and anti-inflammatory processes within biological structures.

radiofrequency Radiant Mobile

4 models of T.e.c.a.r Therapy suitable to meet the needings of each operator

Fisioline RADIANT® 200-300-400

High technology in 3 powerful and versatile models.

Available versions:

  • Fisioline RADIANT® 200: 200W – 350VA of power
  • Fisioline RADIANT® 300: 300W – 400VA of power
  • Fisioline RADIANT® 400: 400W – 450VA of power
RADIANT 200-300-400 con nuovo DISPLAY
RADIANT MOBILE con BORSA IT

Fisioline RADIANT® Mobile

A dynamic, compact and portable T.e.c.a.r. Therapy.

Fisioline RADIANT® Mobile: portable version with 200W – 350VA of power and a practical carrying case.

Two modes of heat transmission

The different modes of thermal energy generation and transmission, capacitive and resistive, related to the target tissue typology and to the therapeutic objectives, allow the therapist the optimal ways to use the antalgic,

trophic and mechanical properties of the checked administration of the heat, in the different phases post-traumas until the complete functional and anatomical recovery.

Capacitive mode

  • Medium-low levels: acute pathologies, muscular traumatology, edema treatment
  • Higher levels: chronic pathologies, pain treatment

Resistive mode

  • Osteoarticular pathologies
  • General traumatology
  • Arthrosis, enthesis
  • Tendinitis, capsulitis, bursitis

We semplify your operation with new capacitive bipolar applicators

An exceptional feature of FISIOLINE RADIANT®  are the circular capacitive bipolar handpieces. This application technique, which does not require the reference electrode and not even the conductive cream, allows to define the treated area with resistive method by concentrating the energy exclusively on the affected area.

In addition to the capacitive bipolar applicators, FISIOLINE RADIANT®  offers the possibility to opt also for resistive bipolar and tripolar handpieces that, in particular applications, allow to optimize the distribution of the energy.

Continued and pulsed emission

Fisioline RADIANT® combines the continued and pulsed emission keeping under control the hyperthermia effects. Necessary in the treatment of musculoskeletal pathologies in the acute phase or in those treatments that have to be mainly athermic such as recent traumatic injuries.

The pulsed mode allows the operator to set the DUTY-CYCLE (adjustable from 10% up to 90%) and therefore erogation and pause times, customizing the therapy to the needs of each patient.

Automatic mode

Beside the traditional manual therapy, Fisioline RADIANT® is provided with the automatic mode, both capacitive and resistive, allowing the automatic application of the radiofrequency without the continuous intervention of the operator.

Energy power bar: an interactive system between the operator and the energy

Energy Power Bar of fisioline Radiant

Electronic meter, energy power bar and right contact

Fisioline RADIANT® devices are equipped with an electronic meter that, through constant measure of the tension and current that flows to the patient, calculates the impedance of the treated area. The impedance measured in “Ohm” (Ω symbol) is constantly monitored during treatments and the energy transferred to tissues is displayed through an Energy Power Bar. This bar is divided into three sectors. The central sector (NORMOTHERMIA, green indicator) indicates an optimal energetic transfer. The filling of this Energy Power Bar is inversely proportional to the measured impedance, so the more the impedance decreases, the more the bar is filled (third sector, HYPERTHERMIA, red indicator). Vice versa, the bar remaining in the first sector (HYPOTHERMIA, blue indicator) indicates high impedance.

7 frequencies

  • because they work at different depths

  • because they treat different tissue typologies

  • because they allow the maximum flexibility

  • because they allow different operating modes

  • because they personalize the therapies

Automatic scanning of frequencies with Switching modality

The automatic scanning of the frequencies (from 448kHz up to 1000kHz or from 1000kHz up to 448kHz) offers the operator the opportunity to use at the same time the 7 available frequencies during the treatment, both in capacitive and resistive modes.

The automatic switching mode carries out a focused action on the different tissue depths bidirectionally, from the deepest to the most superficial tissue and viceversa.

More than 80% of efficency

  • Nearly zero energy release.

  • Concentrating all energy delivered on the treated area.

  • Total safe operability.

Effective, safe and customizable therapy

Rehabilitation, Physiotherapy, Traumatology and Sports Medicine

Physioaesthetics and Aesthetic Medicine

Treatment with radiofrequency diathermy counteracts sagging tissues caused by aging. The treatment causes the contraction of the skin with a visible plumping and lifting effect from the first few sessions, with a gradual improvement of the treated areas. The aesthetic effects are visible anytime between a few days and several weeks.

Fisioline RADIANT® is recommended for treating wrinkles. It has a toning effect and is also an excellent cell antioxidant. Fisioline RADIANT® has vasodilating and draining effects that promote the elimination of stagnant fluids, increasing the supply of oxygen to cells.

Fisioline RADIANT® restores cell activity, encouraging increased production of elastin and collagen fibres, generating a revitalising effect and improving skin colour, density and elasticity.

Wizard and the library of pathologies

A unique feature of Fisioline RADIANT® is the Wizard, a step-by-step digital guide to use the device. Thanks to an intuitive software, the Wizard leads the Doctor and the Physiotherapist in selecting over 80 therapeutic preset protocols dedicated to both severe and chronic pathologies. Each preset protocol can be composed of several phases. Thanks to the Wizard the operator can select, modify and keep always under control the functions and the operatives parameters.

Fisioline RADIANT® also offers the operator the possibility to create personalized programs designed for a patient and indicated for the specific pathologies and areas to be treated for rapid and efficient therapies.

Touch-screen display

The interface of Fisioline RADIANT® in touch-screen version displays the parameters on a large Touch Screen color TFT 7” display to remotely read and give to the operator control of the correct device performance.

RADIANT® Assistant, your PERSONAL COACH

Crash course of T.e.c.a.r. Therapy available in your technology

Multimedia videos associated to treatments.

Fisioline RADIANT® presents an important innovation: the matching of preset therapeutic protocols to illustrating video tutorials, always available, updatable and usable directly from the device console, showing details the steps to be followed by operator and patient during the therapy. These training materials allow for a rapid use even for operators with no particular experience in the use of T.e.c.a.r. Therapy.

In-depth video YouTube

Discover all the products of our medical division!

Fisioline S.r.l. - P.I. 01825480047 - Privacy Policy - Cookie Policy - allisio design